Phones: 512-635-8793
512-635-8824
Fax: 512-650-3663
FREE Ground Shipping on most orders over $50*

2007.5-2017 6.7L

How can I reset perform service indicator in 2007 dodge RAM 3500?
1. Turn the ignition switch to the ON position (Do not start engine).
2. Press and release the brake pedal two times.
3. Fully depress the accelerator pedal slowly two times within 10 seconds.
4. Turn the ignition switch to the OFF/LOCK position.

How can I reset the oil change indicator?
1. Turn the ignition switch to the ON position (Do not start engine).
2. Fully depress the accelerator pedal slowly three times within 10 seconds .
3. Turn the ignition switch to the OFF/LOCK position.

  • NOTE: If the "Oil Change Required" indicator message illuminates when you start the vehicle, the indicator did not reset. If necessary repeat this procedure.









  • Copyright © 2017 Storm Automotive Technologies. Powered by Zen Cart